| Go to Japanese
Nano-Order Tensile + Nano-Order Compression in One
In-situ tensile test by nm-step with High Tillt
Tensile + Tomography Holder = 4D data
A sample mount cartridge detachable ⇒ Easy link to SEM
When putting the sample into the cartridge, we will perform the tensile
with the structure deforming the cartridge.
It is the only holder that can attract the in-situ tensile test with 1 nm step.
Tensile cartridge is provided according to user's request.
- TEM holderに試料を装着した状態で、試料のみを
||HATA-Holder System は、Azimuthに対して±5°の範囲でのローテーションが可能
Schematic diagrams of tilted specimen stages of side-entry TEM holders
in objective-lens pole pieces,
viewed along the primary tilt axis X (α) parallel to longitudinal directions of the holders
(a) The case of a standard double-tilt holder with a gimbal (specimen stage)
to the holder by pivot pins at the secondary tilt axis Y (β)
(b) The case of a tomography holder without the supporting outer frame
at Y (β) tilt axis.
Virtual pivot system (TM)
Back lighting system
| High Angle Triple Axis Holder System (TEM holder)
| Item Name: HATA-Holder System ( Set of HATA- Holder for ST with Index
Dock System )
Item number: 911 0624 5001
Applicable instrument: FEI Tecnai Super Twin series and Titan.
Model name: HATA-8075-ST ( High Angle Triple Axis Holder )
CFS ( Compartments to Fasten Specimen ) - Attachable cartridges
Maximum Alpha tilt range +/-80 Degrees
( Limited by the max stage tilt, for gap such as Super Twin pole piece)
Note: Beam might be shadowed by specimen grid and CFS itself. Note:
Maximum Alpha tilt might be limited by Gonio Stage condition.
Maximum Beta tilt range +/- 7.00 Degrees.
( Fully Motorized control )
Maximum Azimuth rotation range +/-5.00 degrees.
( Controlled by off-line Index Dock System )
| Index Dock System
| Model name: HATA-IDS005
Maximum rotation (azimuth) ranges +/-5.00 Degrees .
Minimum step control of angle is 1/100 Degree by micrometer.
The rotation angle is displayed with a digital meter.
Optic transmission lighting for Spacemen is behind side and adjustable
brightness control there.
Index Dock System is bridge fame structure, therefore comfortable pass
to the Binocular stand base.
Bridge fame height clearance is adjustable by four independent stands.
| Patent protected Beta axis tilt mechanism with a virtual Beta angle Pivot.
Virtual pivot, our solution that grants advantage no other holder can offer.
Allows crystal orientation compensation with Beta Tilt at High Alpha angles
with a decided rotation.
We utilize the limited pole piece gap in a way that has never been utilized
The concept increases the efficiency of X-Ray detection.
| CFS is a flexible cartridge system for various purposes.
After setting the specimen rotation angle, simply fix the cartridge back
on the holder.
Allows easy transfer to other environment such as FIB chamber.
With this solution a number of cartridges can be processed and re-processed
inside FIB chamber
without physically touching the sample itself.
Possibility to have as many cartridges as you wish for only one HATA-Holder
you can store your precious sample inside a cartridge for years and
the just fit it to the holder rod
for another observation with the exact same orientation and position.
We can also offer specially designed low background cartridges for EDS
analysis as well as bulk
| The design of the IDS is the solution for a controlled Azimuth rotation
of the specimen with CFS.
The Azimuth rotation is limited to +/- 5 Degrees.
With the Index Dock System, the rotation is a well-controlled process with a 1/100-Degree precision.
Digitally displayed indication of the rotation angle.
The purpose of the Gas Flow Cover is anti-oxidation for the HATA-Holder system.
If you have access to Nitrogen (N2) Gas in your TEM room, you may use flow via this unit for a few seconds.
Unwanted humidity or such is avoided by the overpressure of N2 Gas and reduce contamination of the HATA-Holder.
If you don't have access to Nitrogen (N2) Gas in your TEM room, you can use a small Gas bottle.
Note: If you use the Nitrogen Gas, please use Oxygen density meter for your safety.
| The index dock system is designed as a bridge.
The height can easily be altered with the adjustable feet.
Our idea is that you can use any of your favorite binocular stands or magnifying
There is a light with adjustable intensity under the specimen mounting
It helps when you mount your sample and it let you see the actual transmitted
The mounting of the holder into the stand is very easy to use construction.
A simple push of a button locks and unlocks the holder.
| Product design or product specification are subject to change without prior
A part of this product is protected with a Patent
引張り ナノ引張り 圧縮 ナノ圧縮 ナノ引張りホルダー その場観察引張りホルダー その場観察圧縮ホルダー
nano tensile holder