TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D
Vartual_Pivot
TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D
TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D
TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D


Schematic diagrams of tilted specimen stages of side-entry TEM holders in objective-lens pole pieces,
viewed along the primary tilt axis X (α) parallel to longitudinal directions of the holders
(a) The case of a standard double-tilt holder with a gimbal (specimen stage) attached
to the holder by pivot pins at the secondary tilt axis Y (β)
(b) The case of a tomography holder without the supporting outer frame at Y (β) tilt axis
.

 

TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D
     Virtual pivot system
(TM)

TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D


TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D


TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D
      Back lighting system

TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D

TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D

TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D
TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D
TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D High Angle Triple Axis Holder System (TEM holder)
TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D
 TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Item Name: HATA-Holder System ( Set of HATA- Holder for ST with Index Dock System )
   Item number: 911 0624 5001

  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Applicable instrument: FEI Tecnai Super Twin series and Titan.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Model name: HATA-8075-ST ( High Angle Triple Axis Holder )
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D CFS ( Compartments to Fasten Specimen ) - Attachable cartridges
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Maximum Alpha tilt range +/-80 Degrees
     ( Limited by the max stage tilt, for gap such as Super Twin pole piece)
    Note: Beam might be shadowed by specimen grid and CFS itself. Note:
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Maximum Alpha tilt might be limited by Gonio Stage condition.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Maximum Beta tilt range +/- 7.00 Degrees.
     ( Fully Motorized control )
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Maximum Azimuth rotation range +/-5.00 degrees.
     ( Controlled by off-line Index Dock System )

TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Index Dock System
TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D
 TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Model name: HATA-IDS005
   Maximum rotation (azimuth) ranges +/-5.00 Degrees .
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Minimum step control of angle is 1/100 Degree by micrometer.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D The rotation angle is displayed with a digital meter.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Optic transmission lighting for Spacemen is behind side and adjustable brightness control there.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Index Dock System is bridge fame structure, therefore comfortable pass to the Binocular stand base.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Bridge fame height clearance is adjustable by four independent stands.


TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Patent protected Beta axis tilt mechanism with a virtual Beta angle Pivot.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Virtual pivot, our solution that grants advantage no other holder can offer.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Allows crystal orientation compensation with Beta Tilt at High Alpha angles with a decided rotation.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D We utilize the limited pole piece gap in a way that has never been utilized before.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D The concept increases the efficiency of X-Ray detection.

TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D CFS is a flexible cartridge system for various purposes.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D After setting the specimen rotation angle, simply fix the cartridge back on the holder.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Allows easy transfer to other environment such as FIB chamber.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D With this solution a number of cartridges can be processed and re-processed inside FIB chamber
    without physically touching the sample itself.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Possibility to have as many cartridges as you wish for only one HATA-Holder means
    you can store your precious sample inside a cartridge for years and the just fit it to the holder rod
    for another observation with the exact same orientation and position.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D We can also offer specially designed low background cartridges for EDS analysis as well as bulk
    specimen cartridges.

TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D The design of the IDS is the solution for a controlled Azimuth rotation of the specimen with CFS.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D The Azimuth rotation is limited to +/- 5 Degrees.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D With the Index Dock System, the rotation is a well-controlled process with a 1/100-Degree precision.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Digitally displayed indication of the rotation angle.





TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D The purpose of the Gas Flow Cover is anti-oxidation for the HATA-Holder system.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D If you have access to Nitrogen (N2) Gas in your TEM room, you may use flow via this unit for a few seconds.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Unwanted humidity or such is avoided by the overpressure of N2 Gas and reduce contamination of the HATA-Holder.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D If you don't have access to Nitrogen (N2) Gas in your TEM room, you can use a small Gas bottle.

     Note: If you use the Nitrogen Gas, please use Oxygen density meter for your safety.


TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D The index dock system is designed as a bridge.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D The height can easily be altered with the adjustable feet.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D Our idea is that you can use any of your favorite binocular stands or magnifying glass.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D There is a light with adjustable intensity under the specimen mounting area.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D It helps when you mount your sample and it let you see the actual transmitted specimen shadow.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D The mounting of the holder into the stand is very easy to use construction.
  TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D A simple push of a button locks and unlocks the holder.

                     Note
TEM holder 試料ホルダー TEM SEM EDX tensile 引張り Tomography 3D
                   Product design or product specification are subject to change without prior notice.
                        A part of this product is protected with a Patent pending.
                        FEI, FEI Company, FEI (stylized logo) and Tecnai, Titan are either registered trademarks or trademarks of FEI Company.