Transfer Module for the SEM and Glove Boxes
The "Transfer Module" is a special device for use with an SEM. It is made for the purpose of carrying delicate and sensible specimens is a capsule from the SEM into a glove box, so that these specimens will be protected from air or moisture at all times. This device will mount on the specimen stage just like a microscope sample. It takes a few moments to install it in the SEM, or in the glowve box.
The shipment volume contains the module, tow vacuum tight flanges, cable bundles, and controller for the opening/closing process.
Coraboration Our Vacuum Transfer TEM holder system
In general, Vacuum Transfe system are very expensive.
However, we recommend this because the transfer module
created by German-made Kamramath Weiss
They product is very simple and easy to handle.
Our atmos Defend TEM holderseries are very compatible
products, so we supply them as a set as a supplier.
An optional heating or heating / cooling platform can be integrated either right away, or at some later time as a retrofit.Whit or without heater, this module can be tilted a certain amount (depends upon type of SEM - usually around 30°)
Summary of Technical Specification
|Dimensions( L × W × H )||120 × 80 × 40mm3|
|Weight||appr. 1kg ( 2.2lb )|
|Specimen Size||8 × 12mm Φ 6mm hoch or
2 × 25mm Φ 6mm high
|Dimensions||200 × 145 × 70mm3|
|Weight||1kg ( 2.2lb )|
|Input Voltage||115V / 230V / AC 50-60Hz|
This product is not Mel-Build original.
It is an imported item specially modified to our request specification.
http://www.melbuild.com Coraborate with